Tony Drum Wood Chipper Crushing Machine Grinding Equipment Large Output

Product Description

About TONY Drum Wood Chipper:
TONY drum wood chipper  is a specialized equipment used to cut wood, branches, straw and other biomass raw materials into uniform wood chips. It is widely used in industries such as papermaking, artificial boards, biomass energy and feed processing. The main raw materials for cutting include small-diameter wood, wood felling and processing residues (such as branches, twigs, veneers, slats, round wood cores, waste veneers, waste wood, etc.), and it can also be used to cut non-wood raw materials, such as sugarcane, reeds, bamboo, etc
The drum wood chipper, with its high efficiency, durability and wide adaptability to raw materials, has become one of the core equipment in the processing of agricultural and forestry biomass.
Structural Composition And Core Components
Tool drum: Multiple flying knives (blades) are fixed on a cylindrical spindle, generating cutting force through high-speed rotation.
Feeding device: It includes the feeding port, conveyor chain plate or feeding roller to ensure that the raw materials are evenly sent into the cutting area.
Bottom knife and screen: The bottom knife is fixed to the machine base and forms a shearing effect with the flying knife. The screen is located at the discharge port and controls the thickness and particle size of the wood chips.
Transmission system: The motor drives the knife drum to rotate through a belt or gear. Some equipment is equipped with a hydraulic system to regulate the feeding speed.

The raw materials are fed in through the feeding port and pushed towards the knife drum by the conveying device. The high-speed rotating flying knife works in coordination with the bottom knife to cut the raw materials into wood chips. The cut wood chips are screened through a screen. Those that meet the particle size requirements are discharged from the discharge port, while those that are too large will continue to be cut inside the machine
TONY Drum Wood Chipper Advantages:
1.The quality of the wood chips is high
The cutting surface is smooth, with uniform thickness and consistent length (error ≤2mm), making it suitable for scenarios with high requirements for wood chip specifications (such as papermaking and medium-density fiberboard).
2. Wide adaptability of raw materials
It is suitable for processing logs, branches and twigs, board veneers, etc. with diameters ranging from 5 to 300mm, especially with high cutting efficiency for wood along the grain. However, it has poor adaptability to wood with nails (it is prone to damaging the blades).
3. High production efficiency
The hourly output can reach 1 to 50 tons, and the unit energy consumption is low
4. Low maintenance cost
The blade replacement cycle is long (it can cut 500 to 1,000 tons of wood under normal use), with few vulnerable parts and low maintenance costs. 
TONY drum wood chipper with its high efficiency, stability, energy saving, safety and other characteristics, in the wood processing industry occupies an important position.

 

TONY Wood Chipper Type Models
Name	Model	Power	Capacity	Fly Knives QTY	Inlet Size Width*Length*Height	Max Processing Diamater	Out Chips Size	Weight	Main Machine Machine Size
1	TPQ216	55KW	4-7TPH	2Pieces	50cm*4.5m*50cm	20CM	25-55mm-Adjustable	4.8T	5800*1900*1200MM
2	TPC1000	90KW	7-10TPH	6Pieces	1m*4.5m*50cm	25CM	25-55mm-Adjustable	9.8T	8100*1400*2125MM
3	TPC1000	110KW	8-10TPH	6Pieces	1m*4.5m*50cmChain Inlet	25CM	25-55mm-Adjustable	9.8T	8100*1400*2125MM
4	TPC1300-600	132KW	10-15TPH	6Pieces	1.3m*4.5m*60cm Chain Inlet	30CM	25-55mm-Adjustable	13.8T	9100*1900*2220MM
5	TPC1300-600	160KW	12-15TPH	6Pieces	1.3m*4.5m*60cm Chain Inlet	30CM	25-55mm-Adjustable	13.8T	9100*1900*2220MM
6	TPC1400-600	200KW	14-20TPH	6Pieces	1.4m*4.5m*60cm Chain Inlet	35CM	25-55mm-Adjustable	17.8T	10100*2400*2525MM
7	TPC1400-600	220KW	15-20TPH	6Pieces	1.4m*4.5m*70cm Chain Inlet	35CM	25-55mm-Adjustable	17.8T	10100*2400*2525MM
8	TPC1400-700	250KW	20-30TPH	6Pieces	1.6m*4.5m*1mChain Inlet	35CM	25-55mm-Adjustable	17.8T	11100*2400*2525MM
9	TPC1600-1000	315KW	25-35TPH	6Pieces	1.8m*4.5m*1mChain Inlet	40CM	25-55mm-Adjustable	25.8T	12100*2400*2825MM
10	TPC1850-1000	355KW	30-40TPH	6Pieces	1.8m*4.5m*1.2m Chain Inlet	40CM	25-55mm-Adjustable	35.8T	13100*2500*2925MM
11	TONY8000	400KW	35-80TPH	6Pieces	1.8m*4.5m*1.5m Chain Inlet	55CM	25-55mm-Adjustable	55.8T	14100*2800*3125MM
12	TPQ81138	560KW	40-50TPH	6Pieces	1.3m*4.5m- Belt Inlet	40CM	25-45mm-Adjustable	32.8T	15100*2570*1933MM
13	TONY10000	630KW	50-100TPH	6Pieces	1.8m*4.5m- Chain Inlet	60CM	25-55mm-Adjustable	65.8T	15100*3000*3225MM

What raw materials can a wood chipper be used to cut?
The drum chipper can process a variety of wooden and non-wooden biomass raw materials, specifically including:
1. Wood category
Logs: Various soft and hard mixed woods such as pine, fir, poplar, birch, etc., with a diameter usually no more than 30 centimeters (the processing capacity varies among different models of equipment).
Branches and twigs: Pruned branches and twigs of trees, with a diameter of no more than 10 centimeters.
Board scraps: Waste wood, wood chips, wood strips, etc. left over from wood board processing.
2. Agricultural and forestry waste
Straw types: corn stalks, sorghum stalks, sugarcane bagasse, reeds, etc., are often used as biomass fuel or raw materials for papermaking.
Bamboo materials: bamboo, bamboo branches, bamboo slices, which can be cut into bamboo slices for use in bamboo fiberboard or papermaking.
Shrubs and vines: Purple locust, brambles, vines, etc., are suitable for biomass energy processing.
3. Other raw materials
Recycled wooden raw materials such as used wooden furniture (which needs to be disassembled first to remove metal and plastic parts), wooden pallets and wooden boxes
What Is a Complete Wood Pellet Production Line?
Wood log is the most common raw material for making wood pellets.The main processing process of wood pellets:
01Wood Chipping Process
This process is mainly used to grind the wood logs whose diameter is under 25cm without barks into wood chips with size 25-55mm.   The finish wood chips size can be adjustable by changing different sizes of screeners and adding flying knives inside the wood chipper.
02Fine Crushing Process
This process is mainly used to crush  wood chips into sawdust,to ensure the density and combustion efficiency during the subsequent pressing and forming process,Hammer mill can quickly crush the materials to the required particle size.   The production process is continuous, which greatly improves the production efficiency.
03Drying Process
This process is mainly used to dry the moisture content of sawdust to 10-15%.  Drying the raw material to the proper moisture content is essential for the manufacture of high quality pellets. .   For a small batch, the raw material can be left in the sun for at least 24 hours to dry naturally;   For larger batches, a dryer can be used to dry the raw material to the desired moisture content
04Pelleting Process
This process is mainly used to products pellets with φ6-8mm.  TONY's new 304 stainless steel vertical ring die pellet machine is extruded by ring die and roller group, the raw material is squeezed into the ring die hole to form, and constantly extruded to the outer end.   When pelleting, it is necessary to ensure the uniform feed .
05Cooling Process
This process is mainly used to cool pellets from 80-90ºC to 20-30ºC.  The freshly pressed pellets have a relatively high temperature and are soft.   They need to be cooled and shaped through a cooler .   After cooling, the hardness of the particles increases, making them easier to store and transport
06Packing Process
This process is mainly used to pack pellets into 15-50KG/Bags.  Once the pellets are cooled, they are transported to a packing facility, packed and stored in a dry place.  Finished wood pellet products are usually packaged in ton bags or small bags to meet the needs of different customers.

1. Can you customize products for customers?
Yes, we can customize and produce crushing machinery according to customer's requirements or drawings.
2. How about the quality of your products?
After you receive the equipment, if there is a quality problem, our company will fulfill the responsibility according to the contract.
3. How can we trust your factory?
We recommend that you come to our factory to see the goods, verify the real situation of the products, and learn more about our factory.
4. Why do prices change so often?
The price depends on the latest prices of raw materials.
5. What's your minimum order quantity?
The minimum order quantity is 1 set. We shall appreciate your order.
6. How long is the guarantee period for your machines?
A: Our equipment is guaranteed for 12 months, and we also provide 24-hour online service if you have questions
7.What about spare parts?
We provide some free spare parts, such as blades, belts, washers and other small parts, because blades, hammer, bearings and other important wear parts, we recommend customers to buy some appropriate to save freight, we have enough spare parts, now in stock.