Tony Wood Pellets Cooling Equipment Galvanized Cooler Separator Counter -Flow Design

• Customization: Available
• Type: Pellet Cooler
• Voltage: 220V/380V/415V/440V
• Model NO.: TCN-15
• Automatic Grade: Automatic
• Controlling Mode: CNC
• Energy Saving: Energy Saving
• Certification: CE, ISO
• Warranty: 1 Year
• Customized: Customized
• Condition: New
• Color: Multi Color
• After-sales Service: Lifetime After-Sales Service
• Power: 0.75kw
• Capacity: 5-8tph
• Cooling Volume: 4
• Cooling Time(Minute): No Less Than 6-10mins
• Cooling Temperature: No High Than Room Temperature 3-5℃
• Weight: 2t
• Material: Galvanized
• Transport Package: Iron/Container
• Specification: 1500*1500*2100mm
• Trademark: Tony
• Origin: China
• HS Code: 8479300000
• Production Capacity: 100sets/Month
• Package Size: 150.00cm * 150.00cm * 210.00cm
• Package Gross Weight: 2000.000kg

Product Description

Product Description

TONY Galvanized Pellets Cooler

TONY Galvanized Pellets Cooler is a kind of efficient particle material cooling equipment, using countercurrent cooling principle, so that the particles fully uniform cooling. Can work in high temperature, high humidity, dusty environment, widely used in biomass pellet fuel, feed, chemical industry and other industries. Its role is to cool the high-temperature granular material to a suitable temperature, which is convenient for subsequent storage, transportation or further processing operations

TONY Galvanized Pellets Cooler greatly improve the production efficiency and product quality, thus extending the storage time of the product.

TONY Galvanized Pellets Cooler using galvanized sheet material, more corrosion resistance, improve the service life of the equipment

The advantages of biomass pellet coolers mainly include the following aspects:

1.Efficient Cooling: The cooler adopts the working principle of air convection. Through the dual-fan working mode, one fan is responsible for blowing air to take away the heat on the surface of the particles, and the other fan is responsible for exhausting air to discharge the heat out of the bin through the induced draft fan, thereby achieving efficient cooling.
2.Temperature Control: The cooler can accurately control the combustion rate and temperature of the fuel to avoid safety problems caused by high temperature, such as reduced risk of explosion or fire.
3.Reduced Smoke Emissions: The cooling process helps to reduce the smoke generated by the particles during the combustion process and improve the air quality.
4.Stable Operation: Due to the existence of the cooling system, the burner can maintain a stable operating state and maintain a good thermal efficiency even under load changes.
5.Energy Saving & Environmental Protection: The water cooling design reduces the impact on the environment, meets the requirements of green energy, and has relatively low operating costs in the long run.
6.Easy Maintenance: Although the cooling system needs to be checked and cleaned regularly, it reduces the difficulty of maintenance compared to equipment without cooling.

Model	TCN-15	TCN-30
Output(T/h)	5-8	8-12
Cooling Volume	4	6
Cooling Volume	3+1.1	3+37+2.2
Cooling Time(minute)	No less than 6-10mins
Cooling Temperature	No high than room temperature 3-5ºC

Q: What is a Galvanized Pellets Cooler ?
A: A Galvanized Pellets Cooler Can cooling the pellets temperature can be lowered to about 5 degrees above the room temperature.
Q:  What is raw material?
A: Stalk, wood chips, nut shell, straw, rice husk, bamboo chips, paper, leaves, waste wood, agriculture waste, wood shavings,
sawdust
Q:  What is the usage?
A: The pellet cooler is mainly used to cool the freshly pressed high-temperature pellet feed, biomass pellets and other granular materials.
Q: what is your main market?
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: what is your producing time?
A: Producing time depends on that machines you ordered.  Usually takes 45 days.
Q: If equipments have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.  We will check the machine to get the problem.  lf need parts, will send them to you.
Q. what is your payment term?
A:T/T 40% down payment, balance to be paid before shipment.

After Sales Service