Tony Wood Sawdust Rice Husk Straw Hay European Pine Pellet Making
Biomass pellet machine is a kind of agricultural and forestry waste (such as rice husk, straw, wood chips, straw, corn straw, wheat straw, cotton stalk, peanut shell, corncob, branches, leaves, sawdust, etc.) raw materials through the physical extrusion process into granular fuel equipment. Biomass pellet is a clean, efficient, safe and sustainable new fuel, which has a wide application prospect. Such as heating, industrial boilers, biomass power generation and so on.
The bearing chamber is made of forged tempered wear-resistant material, which is durable, with high gearbox output and low power consumption, with greater stability and lower maintenance rate.
The ring die of TONY pellet machine is vertical double layer, the upper and lower two layers are dual-use, improve the utilization rate, reduce the cost and improve the efficiency. Automatic timing oil lubrication is safer and more reliable.
TONY Pellet Machine Spare Parts
Ring Die
1. Materials:Bearing Steel GCr13,hardness above HRC62.
2. Double-lay die, dual use.Service Time: 1000-1500 hours
3. Hole diameter:4mm, 6mm, 8mm, 10mm, 12mm
Roller Group
1.Materials: Bearing Steel GCr13
2.Service:500-600 hours
3.TONY 132KW pellet machine has 2 rollers as a group.
Rollers Shell
1.Materials: Bearing Steel GCr13
2.Service:500-600 hours
3.According to actural factors, such as capacity and raw material, two or three or four rollers are used.
Bearings
1.China HRB Bearings.
2.Genuine Haerbin bearings Longer service life.
3.Larger bearings inside.
Wide Range Of Application
Raw material:Generally speaking,any materials can be made into biomass pellets as long as it will burn.The traditional materials for fuel pellets are wood chips,wood shavings,wood sawdust from the sawmill or forestry residue such as branches,bark,leaves,etc.Thus this kind of pellets are called wood pellets.With the skyrocketing increasing demand of biofuel pellets,people developed varieties of agri-waste to make biomass pellets. Corn stalk pellets, wheat straw pellets,rice husk pellets,coconut shell pellets,sugarcane bagasse pellets can all be listed at this sort of pellets.There are also paper pellets and plastic pellets made of municipal solid waste
Density: The density of raw materials is generally 0.1 - 0.13t/m³, and the particle density after forming is 1.1 - 1.4t/m³.
Elemental composition: 75-85% carbon content, 3-6% ash content, 1-3% moisture content, absolutely no impurities such as coal gangue, stones, etc.
Catalyst value: The biomass pellet fuel generates a large amount of heat, with a heat generation of around 3900-4800 kcal/kg. The calorific value of the pellet fuel made from different raw materials varies.The calorific value of the pellet fuel made from different raw materials varies. For example, larch particles are about 4022 kcal (16829kj/kg), red pine particles are about 3978 kcal (16645kj/kg)
-24 Hours Online Service.
-Inquiry will be replied within 2 hours.
-All-the-way tracking service offered from placing order to delivery.
-Free training for operation, debugging and daily maintenance.
-We can provide professional guide installation.
-One year warranty and all-round after-sales service.
-Customized design and flow chart are available for our clients.
-Independent R&D team and strict & scientific management system
Questions asked Frequently
Q: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q: What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q: What are pellets used for?
A: Pellets are used mainly for heating, animal feed, and animal bedding. Many other applications may apply.
Q: What size does my material need to be, to run through the pellet mill?
A: All materials must be 5mm or less.
Q: What size pellets can I make?
A: We have dies sizes from 4mm-12mm, depending on the machine or your raw materials.
Q: Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia, Southeast Asia, Africa, South America, Ireland and Australia.
Q: If I purchase a pellet mill, will you show me how to make pellets?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.
Audited Supplier 
){kind=link}