TONY Preofessional Pellet Press Wood Pellet Machine TYJ551 132KW
TONY--- Professional Manufacturer of Pellet Machines
Brief Intro: Owns a professional team in researching, designing, manufacturing, trading, installing instructing and serving on pelleting equipments.
"TONY" machines with good reputation have been exported to lots of Europe, South America, Southeast Asia countries, and set agents in Brasil ,Canada, Germany, America, South Africa, Australia, India,Vetnam, Malaysia and so on countries.
DESCRIPTION:
TONY wood biomass pellet machine is a new biomass fuel production machinery by using crushed sawdust . Compared with the old machine, it obsorbed the essence of horizontal ring die and flat-die Pellet Mill Machine, solved the insufficient pressure, die crack problems of horizontal ring die pellet machine, and overcame the small capacity, high failure rate of flat die wood. pellet making machine.
Advantages of wearing parts
Double-layers Ring Die
All kinds of pellet machine only have 1 die(ring die).
Material:alloy and stainless steel.
Life time:3000-4000 hours
1.The professional heat treatment processing technology can
make its hardness above HRC62.
2.Vertical Ring die,feeding vertically.
3.Double-lay die,dual use.when one side is damaged,turn over
and use the other side.
4.The compression ratio can be custom made.
Roller
1.Number of rollers:4 pieces
2.Die fixed,rollers running,materials centrifugal and
evenly distributed around.
3.Structure:roller shell and bearing.
4.Working life of rollers:1500-2000 hours
Spindle
1.Our main shaft is forged
2.No air inside the main shaft while being forged
3.Hard to be broken while high-speed running
Raw material: wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical material
Size:2-4mm (All the raw materials must be crushed into sawdust before going
to wood pellet machine.If not, you may need a wood chipper, wood crusher.)
Moisture: Generally, 10-15% is best for producing good quality wood pellet.
| Model |
Power(KW) |
Capacity(T) |
Weight(T) |
Size(mm) |
| TYJ551-II |
90-110 |
1-2 |
5.5 |
2364*1550*1705 |
| TYJ551-III |
132 |
2-2.5 |
5.5 |
2364*1550*1705 |
| TYJ760-III |
160/185/200 |
2.5-3.5 |
9 |
2564*1750*2150 |
| TYJ860-III |
220-250 |
3-5 |
13.5 |
2664*1950*2150 |
How to design Wood log pellet line?
wood log is the most common raw material for making wood pellets.
So, how to design a suitable wood pellet production line with wood log as raw material?
First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.
After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).
Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.
Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.
TONY CASE
The advantages of buying equipments in our company are:
1. a full range of design, construction, equipment supply, construction, installation supervision and commissioning, staff training;
2. license for the design, construction, installation, wiring, and other works;
3. full certification of equipment;
4. officially registered trade mark;
5. full warranty, post warranty and service;
6. warranty on all equipment - 13 months;
7. ratio price-quality-assurance;
8. vast project experience. we have established and put into operation so many of pellet plant productivity on the finished product from 0.5 to 20 t / h in Malaysia, Thailand, Vietnam, Germany, France, Bulgaria, Serbia, Romania, Korea, Australia etc;
9. large stock of finished equipment and spare parts;
10. all equipment of our production, equipped with electric motors and gearboxes, that made in big company
TONY CERTIFICATE
Our production workshop
Questions asked Frequently
Q: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q: What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q: What are pellets used for?
A: Pellets are used mainly for heating, animal feed, and animal bedding. Many other applications may apply.
Q: What size does my material need to be, to run through the pellet mill?
A: All materials must be 5mm or less.
Q: What size pellets can I make?
A: We have dies sizes from 4mm-12mm, depending on the machine or your raw materials.
Q: Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia, Southeast Asia, Africa, South America, Ireland and Australia.
Q: If I purchase a pellet mill, will you show me how to make pellets?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.
){kind=link}