Stainless Steel Pellet Machine for Wood Chips/Rice Husk/Rubber Wood Pellet

• Customization: Available
• Type: Ring Die Pellet Machine
• Voltage: 380V
• Model NO.: TYJ-551-III
• Automatic Grade: Automatic
• Controlling Mode: CNC
• Energy Saving: Energy Saving
• Certification: CE, ISO
• Warranty: 1 Year
• Customized: Customized
• Condition: New
• Color: Multi Color
• After-sales Service: 1 Year
• Usage: Making Biomass Pellets
• Application: Biomass Fuel Pellets Producing, Power Generation
• Weight: 9tons
• Transmission: Big Gear
• Ideal Moisture: 10-15%
• Capacity: 2-2.5ton/H
• Transport Package: Iron
• Specification: 2250*1400*2150
• Trademark: tony
• Origin: China
• HS Code: 8479300000
• Production Capacity: 100sets/Month
• Package Size: 2450.00cm * 1950.00cm * 2150.00cm
• Package Gross Weight: 6200.000kg

Product Description

                stainless steel pellet machine for wood chips/rice husk/rubber wood pellet

Product Description

TYJ Series vertical ring die pellet machine is patented product, which has introduced advanced technologies at home and abroad. Vertical ring die, no material blocking. Double-layer ring die greatly increased its working efficiency, and high-alloy steel mold greatly extends its service life. Applicable humidity of raw material ranges from 10% to 15%, and raw material dimension should be 2/3 of pellet dimension. Widely used in biomass energy plant, power generation station.

raw materials

Size:Less than 5 mm
All the raw materials must be crushed into sawdust before going to wood pellet machine.If not, you may need a wood chipper, wood crusher. Moisture:10-15% .
Better for pelletizing high quality pellets, Final Pellets For burning
Ø6mm/8mm: household stove burning;
Ø8mm-18mm: Industrial using
Energy Level: 5kwh/kg, Compared to Oil: 1 lty oil = 2kg wood pellets
 

How to make pellet

wood log is the most common raw material for making wood pellets.
So, how to design a suitable wood pellet production line with wood log as raw material?
First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.
After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).
Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.
Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.
 

Spare Parts

Double-layers Ring Die:
All kinds of pellet machine only have 1 die(ring die).
Material: alloy, stainless steel
Life time: 3000-4000hours
1.The professional heat treatment processing technology can make its hardness above HRC62.
2.Vertical Ring die, feeding vertically.
3.Double-lay die, dual use. When one side is damaged, turn over and use the other side.
4.The compression ratio can be custom made
 

 

Rollers

1. Number of rollers:2 pieces
2. Die fixed, rollers running, materials centrifugal and evenly distributed around.
3. Structure:roller shell and bearing
4. Working life of rollers:1500-2000 hours

The rotary support is installed under the discharge housing to avoid the traditional reture support is easy to be corroded by steam at the top, the internal steel ball is easy to rust corrosion short comings.
 

 

The gearbox of Shandong Tony Environmental Protection Technology Co., Ltd. only uses plate heat exchangers (oil cooling devices). Compared to traditional tube heat exchangers (oil cooling devices) only used by some manufacturers, they have more advantages.
A plate heat exchanger (oil cooling device) is composed of many stamped corrugated thin plates at certain intervals, sealed with gaskets around them, and overlapped with a frame and compression screws. The four corner holes of the plate and gasket form the fluid distributor and collection pipe. At the same time, the cold and hot fluids are separated reasonably so that they are separated on both sides of each plate. Flow in the channel and conduct heat exchange through the plate.
 

Product Parameters

 

Model	Power(KW)	Capacity(T/H)	Size(MM)	Weight(Ton)
TYJ551-II	90-110	1.5-2	2100*1300*2000	4.9
TYJ551-III	132	2-2.5	2250*1400*2150	5.5
TYJ760-III	160-180	2.5-3	2500*1600*2400	9.5
TYJ860-III	220-250	3.5-5	2700*1700*2500	14.5

How to design a suitable wood pellet production line with wood log as raw material?
First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.
After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).
Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.
Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.

Other equipments

 

workshop

 

Our Advantages

Features of wood pellet production machine: 
1.Self -lubrication system
A.Spindle automatic lubricatin system
B.Roller automatic lubricatin system :it can keep the pellet machine in maintenance for 24hours.
2.Output of pellet mill machine: Our machine can reach the expected output in our technical parameter.
3.Working  Life of spare parts: Working life of our dies is 3000-4000 hours, much longer than others'.
4.Number of Our Ring Die holes: Our ring die has 5 rows of holes, much more than others'.
5.Driving Method of pellet machine: Our machine is drived by gear,not reduction box; Gear driving is helpful to increase the usage life of gear, so the maintenance rata of gear is much lower.
6.Forged Main Shaft: Our main shaft is forged, not casted. As well known, there is no air bubble in forging process, so it is hard to be broken.
 

Our company

Our service
-24 Hours Online Service.
-Inquiry will be replied within 2 hours.
-All-the-way tracking service offered from placing order to delivery.
-Free training for operation, debugging and daily maintenance.
-We can provide professional guide installation.