| Customization: | Available |
|---|---|
| After-sales Service: | All Working Life Service |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
TONY Debarker Machine, as the name suggests is the tree bark stripping machine, which is a supporting equipment for the production of biomass particles.If the customer uses logs as raw materials to make biomass particles, the bark will cause particles coking, so that the quality of the particles is not good, the value will be reduced, so it is often necessary to peel the bark of the tree. Double roll wood barker, also known as double rotor wood barker, is a new generation of wood barker products developed by our factory on the basis of single roll innovation. The machine is more efficient than the single roll barker and more clean. Less wood damage, better design. TONY Debarker Machine is suitable for peeling new cut softwood and some broadleaf wood,as well as partially frozen and dried wood. Double-roller wood peeling machine is suitable for all kinds of wood, is recommended to replace the manual peeling equipment. |
The Efficient TONY Debarker Machine is mainly composed of feeding mechanism, discharging mechanism, cutter head, transmission system, bottom frame and other parts.
TONY Debarker Machine uses the unique force generated by the rotor with peeling teeth to make the wood segment cycle in the bin groove plate, and also does rotation movement around the axis of the wood segment itself, as well as irregular beating. At this point, the wood segment and teeth, wood segment and wood segment, wood segment and bin between the continuous friction, impact, extrusion, bark quickly separated, to achieve efficient peeling effect.
Trees, branches and other wood into the drum, close the feed baffle, start the machine, run clockwise, the wood in the drum with the operation of the machine, so that the stripping knife can peel the skin on the wood. After 15 minutes, turn off the machine, open the discharge baffle, then start the machine and run counterclockwise for two minutes, and the peeled wood can be automatically sent out through the drum. The stripping rate can reach 95%.
TONY Debarker Machine is suitable for peeling all kinds of wood with bark, such as poplar, pine, cypress, elm, oak, willow, ginkgo, etc., in addition, for frozen wood, curved trees, dry trees can also be peeled.
| 1. Easy feeding, trough type wood peeling machine adopts upper opening trough design, feeding can be connected with the use of grab machine feeding, in today's efficient mechanized operation, the cost of labor and time is very valuable. 2. Easy discharging, the use of side discharging, when the wood is finished peeling operation, open the safety pin, start the hydraulic pump, the hydraulic side cover will be opened, click the discharge switch, the peeled wood will be unloaded from the side, very convenient, and other types of peeling machine due to the different structure, unloading is also very troublesome. 3. The treatment of peeling bark, the trough type wood peeling machine produced by our company is installed under the conveyor belt, the peeled bark will be discharged from one end with the conveyor belt, and the design is more reasonable than other types of peeling. 4. Production efficiency, due to convenient feeding and discharging and four-sided blade design, higher production efficiency, 5. Due to the particularity of its structure, the peeling machine has a good effect on trees with good straightness and no knots. Once the trees are irregular or have branches and burls, the irregular shape can also be used. |
| TONY Debarker Machine Type Model | |||
| Model | Power | Capacity | Main Machine Size |
| TPB-4 | 4.5*2KW | 10TPH | 4000*1800*1700MM |
| TPB-6 | 7.5*2KW | 10TPH | 6000*1800*1700MM |
| TPB-8 | 7.5*2KW | 10TPH | 8000*1800*1700MM |
|
Automatic Design Fully automated production, the feeding mechanism adopts stepless transmission technology, automatic adjustment, and the use of other equipment, automation Chengdu high. |
| Serrated Hob Surface cutting edge, reasonable structural design, higher working efficiency at the same time, the damage to the wood to the minimum, peeling effect is good. |
|
|
High Quality Motor The well-known brand of pure copper core motor, higher quality, with energy-saving, quiet, high mechanical strength, durable and other advantages, if you have special requirements, we can customize for you. |
| Thickened Fuselage Roller plate is made of thick manganese steel seamless welding, good production process allows you to have better quality equipment. Compared with other materials, more strong, durable, service life factory, low machine maintenance rate. |
|
|
Humanized Bin The bin can choose one end discharge or side end discharge, and the design is humanized to meet the needs of different production sites. |
| Reinforced Bearing Bearing adopts HRB bearing, wear-resistant, corrosion-resistant, cost-effective, universal spare parts, you can buy the right bearing anytime, anywhere, to avoid spending more time and energy. |
|
1.The open silo can feed from one end, the other end of production line operation,to overcome the power failure of feed, discharge, segmented working mode shortcomings, high efficiency.
2.Due to the impact of the teeth on the wood segment, not only make the wood segment do circular movement in the casing, and turn around itself,peeling efficiency is high, eucalyptus poplar and other difficult to peel trees have a better stripping rate.
3.Strong adaptability to wood, can be different tree species, diameter, length and shape of the wood segment peeling, because the wood segment do rotary movement and irregular beating, so the concave bend of the wood segment can also be in good contact with the peeling teeth.
4.Because huge housing is fixed, so energy consumption is small, the failure rate is low, the maintenance workload is small, the vibration and noise are much lower, the machine can be produced on the ground, even without the base installation, easy to use.
5.The Two-roll Wood Peeling Machine is equipped with a four-blade cutter, which has high peeling efficiency, low cost and long life.
6.The cutting tool pressure is controlled and adjusted by hydraulic pressure, with advanced structure and reliable performance.
The most common work scene of the TONY Debarker Machine is the use of TONY Wood Chipper, TONY Effective Hammer Mill, the customer is therefore purchased, the customer's logs through the peeling machine to remove the bark, and then use the chipper for slicing, slicing after fine grinding, fine grinding into sawdust, more widely used, such as paper making, furniture factory, the production of biomass particles.
Maintenance of the machine:
1. After the operation of the wood peeling machine, it should be timely checked whether the machine is in operation with serious wear and damage, and the serious wear and damage should be repaired and replaced in time to ensure the use of the next peeling.
2. By professional maintenance personnel for professional maintenance of the wood peeling machine, appropriate deployment, in order to achieve the maximum performance.
3. The warning sound issued by the wood peeling machine in use is caused by the prolonged rotation of the bearing in the work. Therefore, after the operation of the wood peeling machine, the staff regularly lubricate the bearing and adjust the tightness of the belt to maintain the performance of the wood peeling machine.
Our Service:
Pre-Sale Service:
1) Listen to customer needs;
2) Provide free preliminary machine design plan and flow chart,choose and supply the most reasonable configuration equipment;
3) Support remote meetings and visit factory remotely;
4)Offer the professional advice to customer to confirm the final selection;
5) Support site visits to factory.
In-Sale Service
1) All equipment is qualified for installation and commissioning before leaving the factory; supports remote video quality inspection;
2) The disassembly and packaging process of all machines before leaving the factory, providing photos, videos, and annotations;
3) Online or offline free training of buyers' operators (China);
4) Assist buyers to install and debug equipment (overseas).
After-Sales Service
1) 7*24 hours online service; remote real-time video resolution;
2) During the first installation and commissioning process, problems encountered during normal operation should be solved in time;
3) Periodic process inspection and use effect, and timely suggestions for machine maintenance;
4) Lifetime free technical guidance;
5) Update the latest industry information in a timely manner.
FAQ:
You may also have the following questions:
1.What's your advantage?
Honest business with competitive price and professional service on export process
2. How I believe you?
We consider honest as the life of our company, we can tell you the contact information of our someother clients for you to check our credit. your order andmoney will be well guaranteed.
3.Can you give warranty of your products?
Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately ifyou are not pleased with our quality or service.
4.what kind of payment does your company support?
T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
5.What if the machine is damaged?
One-year warranty and comprehensive after-sales service.After this period, we will charge alower fee to maintain after-sales service.
){kind=link}