| Customization: | Available |
|---|---|
| Type: | Wood Chipper |
| Voltage: | 220/380/415/440 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| TONY Wood Chipper, also known as drum chipper, is mainly used to crush small-diameter logs or, plywood, wood branches, furniture waste into evenly sized wood chips, the size of the wood chips is about 25mm-55mm thickness, and the size of the wood chips can be adjusted by adjusting the knife gap. TONY Wood Chipper has high output, low energy consumption, the size of broken wood chips is uniform, uniform thickness, is a very cost-effective crusher Therefore, the drum chip machine is also widely used, such as in wood chip plants, biomass power plants, pulp plants, wood pellet plants and other places. In addition,TONY Wood Chipper can be fed mechanically or manually, but they have everything you need for a fully automated production operation. Thanks to the most advanced data interface, it is very safe to use and easy to maintain. 
|
| 1.The front end of the feed port is provided with an upper feeding roller, and the lower chain plate iscomposed of forced feeding, which can provide stable material feed. 2. Equipped with feeding safety auxil iary device, up and down feeding synchronous operation, by detectingthe running current of the main motor, automatically adjust the speed of the up and down feeding motor,reduce the frequency of clamping and holding machine, to ensure the smooth cperation of the equipment. 3. The overall forging of the knife roll, there will be no risk of opening welding, shredding is easierand more efficient, The cutter roller rotor is tested by dynamic balance tomake the machine run more stable. |
|
The wood chipper is composed of feed belt, discharge belt, frame, cutter roller, upper and lower feeding mechanism, feeding device, hydraulic buffer system and electrical control system. Can be customized according to customer requirements.
The working process of TONY Wood Chipper is mainly composed of the following five parts: transmission, crushing, adjustment, screening and sorting, coarse grain recovery and crushing.
1. Transmission: At the front end of the wood chipper, there is a hydraulic system to help feed, which is composed of the motor and its coupling and gear.
2. Chipping: When the wood comes into contact with the cutting blade, it is cut through the high-speed rotation of the cutting disc. The cutting mechanism is a rotating drum on which several flying knives are mounted. The knife spins the wood into sawdust
3. Adjustment: It is composed of the centrifugal device at the bottom and outside of the spindle adjustment device.
4. Screening And Sorting: This part consists of coarse sieve and fine sieve.
5. Coarse Grain Recovery And Crushing: the outer edge of the drum has a number of square through holes. The cut wood chips fall through the mesh and are discharged from the bottom. Large pieces of wood will be cut again in the machine.
|
|
1. The processed wood chips have uniform length, smooth incision and uniform thickness, which is very beautiful 2. According to the different thickness of the raw material to be cut, with the help of the hydraulic system, the upper feed roller assembly can be lifted and lowered within a certain range. 3. The discharge port is equipped with a durable alloy steel screen. Qualified cutting material falls from the screen hole and is discharged from the bottom through the discharge belt conveyor. Excessive material will be cut again. 4. The blade is very convenient to replace and easy to maintain 5. Structure temperature, high production capacity, low processing cost |
|
|
|
Feeding Belt 1.Transport raw materials, intelligent forward and backward, The higher the gear, the faster the speed and the higher the output 2.As needed,you can choose between belt transport or chain plate transport, chain plate is stronger than belt 3.You can contact TONY to get the price for chain inlet belt conveyors. |
| Motor 1. Adopt well-known brand motor, higher quality 2. Pure copper core motor has the advantages of energy saving, quiet, high mechanical strength and durability 3. If you have special requirements, we can customize it for you. |
|
|
Hydraulic Control 1. According to the different thickness of the raw material to be cut, with the help of the hydraulic system, the upper feed roller assembly can be lifted and lowered within a certain range. 2. Hydraulic forced feeding, feeding speed can be adjusted at will, to a large extent to avoid the card material. |
| Engine Bed 1.The main structure of the machine is the basis of the whole machine,the use of high-strength thick carbon steel manufacturing, strong structure,which can ensure that the wood chip machine even without foundation can be stable operation. 2.TONY can supply you with the wood chipper machine with competitive price and excellent quality. |
|
|
Feed Roller 1. The feed roller is made of 45# Mn steel, which has strong wear resistance and higher strength and performance than the welding parts. 2. Zigzag cross distribution structure, more accurate bite force. 3.TONY rollers are produced and procced by TONY factoty to ensure processing accuracy and ensure the durability of the equipment. |
| Electric Control 1. The basic function controls the opening, running and stopping of the chipper.With flash back alarm protection (when foreign matter enters the chip machine) 3. Motor temperature protection function, to achieve over-heat protection of the motor, while eliminating the heat relay protection easy adhesion.With frequency inlet and we will use famous brand electric parts. |
|
We provide some free spare parts, such as blades, belts, washers and other small parts, because blades, hammer, bearings and other important wear parts, we recommend customers to buy some appropriate to save freight, we have enough spare parts, now in stock.
| TONY Wood Chipper Model-Blades Type | |||||||||
| NO | Model | Power | Capacity | Fly Knives QTY | Inlet Size Width*Length*Height | Max Processing Diamater | Out Chips Size | Weight | Main Machine Machine Size |
| 1 | TPQ216 | 55KW | 4-7TPH | 2Pieces | 1m*4.5m*45cm | 20CM | 25-55mm-Adjustable | 4.8T | 5800*1900*1200MM |
| 2 | TPC1000 | 90KW | 7-10TPH | 6Pieces | 1m*4.5m*45cm | 2CM | 25-55mm-Adjustable | 9.8T | 8100*1400*2125MM |
| 3 | TPC1000 | 110KW | 8-10TPH | 6Pieces | 1.3m*4.5m*60cm Chain Inlet | 25CM | 25-55mm-Adjustable | 9.8T | 8100*1800*2225MM |
| 4 | TPC1300-600 | 132KW | 10-15TPH | 6Pieces | 1.3m*4.5m*60cm Chain Inlet |
30CM | 25-55mm-Adjustable | 13.8T | 9100*1900*2220MM |
| 5 | TPC1300-600 | 160KW | 12-15TPH | 6Pieces | 1.4m*4.5m*60cm Chain Inlet | 30CM | 25-55mm-Adjustable | 13.8T | 9100*1900*2220MM |
| 6 | TPC1400-600 | 200KW | 14-20TPH | 6Pieces | 1.4m*4.5m*60cm Chain Inlet | 35CM | 25-55mm-Adjustable | 17.8T | 10100*2400*2525MM |
| 7 | TPC1400-600 | 220KW | 15-20TPH | 6Pieces | 1.4m*4.5m*70cm Chain Inlet |
35CM | 25-55mm-Adjustable | 17.8T | 10100*2400*2525MM |
| 8 | TPC1400-700 | 250KW | 20-30TPH | 6Pieces | 1.6m*4.5m*1m Chain Inlet | 35CM | 25-55mm-Adjustable | 17.8T | 11100*2400*2525MM |
| 9 | TPC1600-1000 | 315KW | 25-35TPH | 6Pieces | 1.8m*4.5m*1m Chain Inlet |
40CM | 25-55mm-Adjustable | 25.8T | 12100*2400*2825MM |
| 10 | TPC1850-1000 | 355KW | 30-40TPH | 6Pieces | 1.8m*4.5m*1.2m Chain Inlet | 40CM | 25-55mm-Adjustable | 35.8T | 13100*2500*2925MM |
| 11 | TONY8000 | 400KW | 35-80TPH | 6Pieces | 1.8m*4.5m1.5m Chain Inlet | 55CM | 25-55mm-Adjustable | 55.8T | 14100*2800*3125MM |
| 11 | TONY10000 | 630KW | 50-100TPH | 6Pieces | 1.8m*4.5m*1.5m Chain Inlet |
60CM | 25-55mm-Adjustable | 65.8T | 15100*3000*3225MM |
Tips:We can be customized according to customer requirements.
There are many models of TONY chip machine, the factory price is between USD25,000 - USD70,000.
Before quotation, we first need to know what your raw materials are, what is the capacity you want, and choose the right model for you according to your situation
We always believe in the power of quality and integrity. Price is only one of the factors you should consider when buying equipment. I look forward to your full consideration.
TONY wood chipper wil be your best choice for processing wood logs into wood chips.
We can supply capacity 4-100Ton/Hour.
){kind=link}