| Customization: | Available |
|---|---|
| Type: | Ring Die |
| Voltage: | 380/415/440V |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TONY Pinus Sylvestris Pellet Machine Pine Wood Pellet mill New Designed
| TONY Vertical Ring Die Pellet Machine TYJ760-160KW -304Stainless Type Model | ||||||||
| Main Parts: 1.TONY new 304 stainless steel vertical ring die pellet machine TYJ760-160KW. 2. The rollers automatic lubrication system with galvanized grease storage barrel. 3. New cyclone and dust bag collect system, including fan and pip.e 4. Electrical control system for all the above equipment. |
||||||||
| Brand | Model | Main Power | Lubrication Power | Dust Power | Capacity | Weight | Ring Die Inner Size | Machine Size |
| TONY | TYJ760-III-160 | 160KW+4KW | 0.25KW | 0.95KW | 2.5-3TPH | 9T | 760MM | 2464*1750*2150MM |
| TONY Vertical Ring Die Pellet Machine -304Stainless Type Models | ||||||||
| NO | Model | Main Power | Lubrication Power | Dust Power | Capacity | Weight | Ring Die Inner Size | Machine Size |
| 1 | TYJ551-III-90 | 90KW+3KW | 0.25KW | 0.95KW | 1-1.5TPH | 5.2T | 560MM | 2364*1550*1705MM |
| 2 | TYJ551-III-110 | 110KW+3KW | 0.25KW | 0.95KW | 1.5-2TPH | 5.3T | 560MM | 2364*1550*1705MM |
| 3 | TYJ551-III-132 | 132KW+3KW | 0.25KW | 0.95KW | 2-2.5TPH | 5.5T | 560MM | 2364*1550*1705MM |
| 4 | TYJ760-III-160 | 160KW+4KW | 0.25KW | 0.95KW | 2.5-3TPH | 9T | 760MM | 2464*1750*2150MM |
| 5 | TYJ760-III-185 | 185KW+4KW | 0.25KW | 0.95KW | 2.8-3.3TPH | 9.2T | 760MM | 2564*1850*2150MM |
| 6 | TYJ760-III-200 | 200KW+4KW | 0.25KW | 0.95KW | 3-3.5TPH | 9.3T | 760MM | 2564*1850*2150MM |
| 7 | TYJ850-III-220 | 220KW+4KW | 0.25KW | 0.95KW | 3-4TPH | 11T | 860MM | 2664*1950*2150MM |
| 8 | TYJ860-III-250 | 250KW+4KW | 0.25KW | 0.95KW | 3.5-4.5TPH | 12T | 860MM | 2864*2150*2150MM |
| 9 | TYJ860-III-280 | 280KW+4KW | 0.25KW | 0.95KW | 4-5TPH | 13T | 860MM | 2864*2150*2150MM |
1.The motor shaft is directly connected to the gear shaft, which provides stronger power transmission, greater torque resistance, greater stability and lower maintenance rate.. The bearing chamber has been modified, the sealing method has been changed, and the forged and tempered wear-resistant materials have been used to prevent dust from falling into the bearing chamber.
3. The gearbox body is larger, the gears are larger, the output is higher, and the power consumption is lower.
4.The bearings are made of genuine heavy-duty Ha shafts, which have a longer bearing life and a lower maintenance rate for the entire machine.
5.The ring die is vertical and double layered, with dual use of upper and lower layers, improving utilization, reducing costs, and increasing efficiency.
6.The pressure wheel rotates, the material is centrifuged, and the surrounding material is evenly distributed.
7.Efficient and energy-saving, automatic timed oil lubrication, ensuring sufficient lubrication of bearings and safer and more reliable operation.
8.High pressure filtration, clean and smooth independent frequency conversion device, ensuring the yield of pellets.
TONY Biomass Pellet Machine Main Parts
TONY Biomass Pellet Machine Spare Parts
Requirements for raw materials:
Size:Less than 5 mm
All the raw materials must be crushed into sawdust before going
to wood pellet machine.If not, you may need a wood chipper, wood crusher.
Moisture:10-15%
Better for pelletizing high quality pellets, Final Pellets For burning
Ø6mm/8mm: household stove burning;
Ø8mm-18mm: Industrial using
Energy Level: 5kwh/kg, Compared to Oil: 1 lty oil = 2kg wood pellets
Wood pellet processing:
1. Crushing process:
The raw material used to make wood pellets must be broken to a small size, and pelletizer users typically use a wood chipper to cut the wood into pieces 2.5 cm (0.98 in) or smaller
2. Fine crushing process:
Using a hammer mill, smaller pieces are crushed and cut into very small particles, reducing the size of the raw material to 5 mm (0.20 in). Some users will choose the pre-treated sawdust and can skip this step.
3. Drying process:
Drying the raw material to the proper moisture content is essential for the manufacture of high quality particles. Before granulation, it is necessary to ensure that the water content of the raw material is about 10%-20%. For a small batch of particles, the raw material can be left in the sun for at least 24 hours to dry naturally; For larger batches, a dryer can be used to dry the raw material to the desired moisture content.
4.Pelleting process:
The most commonly used equipment for granulation is the pellet machine. TONY's new 304 stainless steel vertical ring die pellet machine is extruded by ring die and press roll, the raw material is squeezed into the ring die hole to form, and constantly extruded to the outer end. When pelleting, it is necessary to ensure the uniform feed to prevent the blocking caused by too fast feed.
5. Cooling process:
When the molding particles leave the pellet machine, the particles themselves will be hot and release water vapor, so they must be cooled and dried, which can make them harder.
6. Packaging process:
Once the particles are cooled, they are transported to a packaging facility, packed and stored in a dry place.
PLEASE NOTE: that different pellet manufacturers may have different process details and quality control standards.
If the wood chips raw materials may contain stones or metal and other debris, if these debris into the pellet machine particle chamber, they are likely to lead to the pellet machine mold clogging or wear, so the raw materials into the wood pellet machine before screening iron impurities. If processing pellets with a variety of raw materials may need to use a drum or blender batch mixing adjustment. Finally, not all particles can be pressed well, during the pressing process, some particles will be scattered or broken, usually using the aperture of the same size as the wood particles of the filter shaking or screening to remove the deformed particles.
The above is the main processing process of wood pellets. If you have any questions, please contact TONY.
TONY is a professional manufacturer and exporter engaged in the research, production, sale and service of Biomass wood pellet line, wood pellet mill, grinding equipment, crushing equipment, drying equipment, cooler and other screening, conveying equipment.Having developed the pellet machines with reliable functions, reasonable design, energy saving and high efficiency low consumption, our vertical ring die pellet mill which use special gear transmission has sold very well during home and aboard.
We always supply the most suitable machines for customers with excellent quality and competitive price.
){kind=link}