About TONY Rotary Drum Dryer:
TONY rotary drum dryer is a drying equipment widely used in multiple industries.The drum is usually installed at an incline and keeps rotating. Sawdust is added from the higher end. Under the combined effect of gravity and the rotation of the drum, the material keeps rolling and moving inside the drum and flows towards the lower end. The interior is equipped with lifting plates, lifting plates, etc., to fully disperse sawdust and improve the drying efficiency.
TONY rotary drum dryer has strong adaptability to materials and can dry various types of materials. Besides sawdust, it can effectively dry materials such as ores, slag, coal, wood chips, sludge, and grains
1. High drying efficiency
Usually, the hot air co-current drying process is adopted. The material is in full contact with the hot air inside the dryer, with a large contact area, which enables the moisture to evaporate quickly, shortens the drying time, improves the drying efficiency, and can quickly reduce the moisture in sawdust to the ideal level.
2. Strong processing capacity
It can be customized according to the actual production needs of users. The daily processing capacity generally ranges from tens to hundreds of tons, which can meet the production requirements of different scales and adapt to large-scale sawdust drying operations.
3. Reasonable structural design
The equipment has a simple structure, occupies a small area, and is easy to build and maintain. For instance, by adopting a drum structure design, it operates stably with a low probability of failure, allowing for long-term continuous operation and reducing both operating and maintenance costs.
4. Good environmental protection performance
Production lines are generally equipped with dust removal equipment, which can collect and purify the dust and waste gas generated during the drying process, reducing environmental pollution and meeting environmental protection requirements.
5. Diverse heat source options
A variety of fuels such as coal, natural gas, steam, biomass pellets and fuel oil can be selected as heat sources. Users can choose the most suitable heat source based on their actual situation and cost considerations, which offers high flexibility.
6. Wide range of applications
In addition to sawdust, it can also be widely applied to the drying of various similar materials such as wood chips, bamboo shavings, bamboo powder and wood shavings, and has strong versatility and adaptability.
|
Model |
Power(KW) |
Evaporate
(T/h) |
|
THG10-12 |
4 |
02 |
|
THG12-12 |
5.5 |
0.3 |
|
THG15-12 |
7.5 |
0.5 |
|
THG15-24 |
11 |
0.8 |
|
THG18-12 |
11 |
0.7 |
|
THG18-24 |
15 |
1.2 |
|
THG20-12 |
18.5 |
0.9 |
|
THG20-24 |
22 |
1.5 |
What Is A Complete Wood Pellet Production Line?
1. Crushing process:
The raw material used to make wood pellets must be broken to a small size, and pellet machine users typically use a wood chipper to cut the wood into pieces 2.5 cm (0.98 in) or smaller
2. Fine crushing process:
Using a hammer mill, smaller pieces are crushed and cut into very small particles, reducing the size of the raw material to 5 mm (0.20 in). Some users will choose the pre-treated sawdust and can skip this step.
3. Drying process:
Drying the raw material to the proper moisture content is essential for the manufacture of high quality particles. Before granulation, it is necessary to ensure that the water content of the raw material is about 10%-15%. For a small batch of particles, the raw material can be left in the sun for at least 24 hours to dry naturally; For larger batches, a dryer can be used to dry the raw material to the desired moisture content.
4.Pelleting process:
The most commonly used equipment for granulation is the pellet machine. TONY's new 304 stainless steel vertical ring die pellet machine is extruded by ring die and press roll, the raw material is squeezed into the ring die hole to form, and constantly extruded to the outer end. When pelleting, it is necessary to ensure the uniform feed to prevent the blocking caused by too fast feed.
5. Cooling process:
When the molding particles leave the pellet machine, the particles themselves will be hot and release water vapor, so they must be cooled and dried, which can make them harder.
6. Packaging process:
Once the particles are cooled, they are transported to a packaging facility, packed and stored in a dry place.
It is important to note that different pellet manufacturers may have different process details and quality control standards.
If the wood chips raw materials may contain stones or metal and other debris, if these debris into the pellet machine particle chamber, they are likely to lead to the pellet machine mold clogging or wear, so the raw materials into the wood pellet machine before screening iron impurities. If processing pellets with a variety of raw materials may need to use a drum or blender batch mixing adjustment. Finally, not all particles can be pressed well, during the pressing process, some particles will be scattered or broken, usually using the aperture of the same size as the wood particles of the filter shaking or screening to remove the deformed particles.
The above is the main processing process of wood pellets. If you have any questions, please contact TONY.
Q: What is a TONY Single-Layer Rotary Drum Dryer?
A: TONY Single-Layer Rotary Drum Dryer is used to dry wood chips, sawdust or other biomass from moisture 55% to 10%.
Q: What kind of materials can be dried?
A: Materials such as wood wastes, saw dust, corn cobs/straw/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be dried.
Q:What capacity would your prefer?
A:We supply different capacity from 1T/Hour up to 50T/Hour
Q:Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia,Southeast Asia, Africa, South America and Australia.
Q: lf i purchase a TONY Single-Layer Rotary Drum Dryer, will you show me how to operation the machine?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.
Audited Supplier 
){kind=link}