Single-Layer Rotary Drum Dryer Wood Chips Sawdust Drying Machine

• Customization: Available
• Warranty: 1 Year
• Certification: CE, ISO
• Model NO.: THGD1.2*12
• After-sales Service: All Working Life Service
• Power: 30kw
• Capacity: 1-2tph
• Early Moisture: 40%
• Final Moisture: 10-15%
• Raw Materials: Sawdust, Wood Chips,Efb,etc
• Feature: High Efficiency Low Cost
• Heat: Wood, Gas, and Others
• Weight: 15t
• Temperature: 600-800
• Dryer Cylinder Volume: 13.6m³
• Roll Speed: 1-6r/Min
• Transport Package: Containers
• Specification: Diameter: 1.2m; Length: 12m
• Trademark: tony
• Origin: China
• HS Code: 8479300000
• Production Capacity: 100 Sets/Month
• Package Size: 1200.00cm * 120.00cm * 120.00cm
• Package Gross Weight: 15000.000kg

Product Description

About TONY Sawdust Rotary Drum Dryer:
TONY sawdust drum dryer is a type of drum dryer. It utilizes the principles of heat conduction and convection. By rotating the drum, sawdust is fully in contact with hot air to remove moisture from the material, reducing its moisture content to 8% to 15% (meeting the requirements of granulation, storage, etc.).
The efficient operation of the TONY sawdust drum dryer depends on reasonable equipment selection, standardized operation procedures and regular maintenance. Users can select the appropriate model and heat source solution based on the characteristics of raw materials, production scale and environmental protection requirements to achieve low-cost and high-efficiency drying operations

TONY Sawdust Rotary Drum Dryer Core Characteristics
1.High efficiency and energy saving:
The thermal efficiency can reach 70% to 85% (while traditional drying furnaces only consume 50%), and the energy consumption is low (about 15 to 30 kilowatt-hours of electricity are consumed for drying each ton of sawdust).
2.Large processing capacity:
A single device can process 1 to 10 tons of sawdust per hour (adjusted according to the diameter and length of the drum).
3.Strong adaptability:
It can handle sawdust with a moisture content of 30% to 80%, and the final moisture content can be controlled by adjusting the drum speed and the temperature of the hot air flow.
4.High degree of automation:
Equipped with a temperature control system and frequency conversion device, it can monitor the drying temperature and material flow rate in real time

 

Model	Power(KW)	Evaporate (T/h)
THG10-12	4	02
THG12-12	5.5	0.3
THG15-12	7.5	0.5
THG15-24	11	0.8
THG18-12	11	0.7
THG18-24	15	1.2
THG20-12	18.5	0.9
THG20-24	22	1.5

What Is A Complete Wood Pellet Production Line?
1. Crushing process:
The raw material used to make wood pellets must be broken to a small size, and pellet machine users typically use a wood chipper to cut the wood into pieces 2.5 cm (0.98 in) or smaller
2. Fine crushing process:
Using a hammer mill, smaller pieces are crushed and cut into very small particles, reducing the size of the raw material to 5 mm (0.20 in). Some users will choose the pre-treated sawdust and can skip this step.
3. Drying process:
Drying the raw material to the proper moisture content is essential for the manufacture of high quality particles. Before granulation, it is necessary to ensure that the water content of the raw material is about 10%-15%. For a small batch of particles, the raw material can be left in the sun for at least 24 hours to dry naturally; For larger batches, a dryer can be used to dry the raw material to the desired moisture content.
4.Pelleting process:
The most commonly used equipment for granulation is the pellet machine. TONY's new 304 stainless steel vertical ring die pellet machine is extruded by ring die and press roll, the raw material is squeezed into the ring die hole to form, and constantly extruded to the outer end. When pelleting, it is necessary to ensure the uniform feed to prevent the blocking caused by too fast feed.
5. Cooling process:
When the molding particles leave the pellet machine, the particles themselves will be hot and release water vapor, so they must be cooled and dried, which can make them harder.
6. Packaging process:
Once the particles are cooled, they are transported to a packaging facility, packed and stored in a dry place.
It is important to note that different pellet manufacturers may have different process details and quality control standards.
If the wood chips raw materials may contain stones or metal and other debris, if these debris into the pellet machine particle chamber, they are likely to lead to the pellet machine mold clogging or wear, so the raw materials into the wood pellet machine before screening iron impurities. If processing pellets with a variety of raw materials may need to use a drum or blender batch mixing adjustment. Finally, not all particles can be pressed well, during the pressing process, some particles will be scattered or broken, usually using the aperture of the same size as the wood particles of the filter shaking or screening to remove the deformed particles.
The above is the main processing process of wood pellets. If you have any questions, please contact TONY.

Q: What is a TONY Single-Layer Rotary Drum Dryer?
A: TONY Single-Layer Rotary Drum Dryer is used to dry wood chips, sawdust or other biomass from moisture 55% to 10%.

Q: What kind of materials can be dried?
A: Materials such as wood wastes, saw dust, corn cobs/straw/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be dried.

Q:What capacity would your prefer?
A:We supply different capacity from 1T/Hour up to 50T/Hour

Q:Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia,Southeast Asia, Africa, South America and Australia.

Q: lf i purchase a TONY Single-Layer Rotary Drum Dryer, will you show me how to operation the machine?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.