Best Factory Price and Hot Selling Biomass Vertical Ring Die Pellet Machine
The Introduction Of ShanDong TONY Company
TONY is a professional manufacturer and exporterengaged the research, production, sale and service of Biomass wood pellet line, wood pellet mill, grimndingequipment, crushing equipment, drying equipment, coolerand other screening. conveying equipment.Having developed the pellet machines with reliable fumctions,reasonable design, energy saving and high eficiency lowconsumption, our vertical ring die pelet mill which usespecial gear transmission has sold very well during homeand aboard
We always supply the most suitable machines forcustomers with excellent quality and competitive price.
Composition of vertical ring mold pellet machine
A set of vertical ring die pellet machine is composed of a main machine, a dust removal equipment, an automatic refueling machine and an electric control cabinet.
Among them, the main shell of the pellet machine is made of 304 stainless steel, which is not easy to corrode and easy to replace parts compared with iron.
Our gear box is Zhejiang Huixin brand, quality, after-sales service are guaranteed.
Introduction toThe Pellet Machine Components
1.The motor shaft is directly connected to the gear shaft, which provides stronger power transmission, greater torque resistance, greater stability and lower maintenance rate.
2.The bearing chamber has been modified, the sealing method has been changed, and the forged and tempered wear-resistant materials have been used to prevent dust from falling into the bearing chamber.
3.Timing and controllable grease filling and oil level alarm device can save at least 20,000 yuan in grease costs.
4.The gearbox body is larger, the gears are larger, the output is higher, and the power consumption is lower.
5.The bearings are made of genuine heavy-duty Ha shafts, which have a longer bearing life and a lower maintenance rate for the entire machine.
6.Adopt customized special gearbox designed and tailored for Tony pellet machine, the gearbox is more suitable for Tony pellet machine.
Advantage-Biomass Vertical Ring Die Pellet Machine
1.Vertical die, feeding Vertically,Arching of raw materials,easy for heating dissipation.
2.Die fixied,rollers rotating , matieral centrifugal ,evenly distributed around.
3.Double-layer dies,up and down dual-use,high capacity ,saving energy.
4.Silent bearings and imported heat and wear resistant fluorine rubber oil seals.
5.Independent lubrication;high pressure filtration,clean and unblocked.
Requirement Of Raw Materials
Raw material: wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical material
Size:2-4mm (All the raw materials must be crushed into sawdust before going to wood pellet machine.If not, you may need a wood chipper, wood crusher.)
Moisture: Generally, 10-15% is best for producing good quality wood pellet.
| Model |
Power(KW) |
Capacity(T) |
Weight(T) |
Size(mm) |
| TYJ551-II |
90-110 |
1-2 |
5.5 |
2364*1550*1705 |
| TYJ551-III |
132 |
2-2.5 |
5.5 |
2364*1550*1705 |
| TYJ760-III |
160/185/200 |
2.5-3.5 |
9 |
2564*1750*2150 |
| TYJ860-III |
220-250 |
3-5 |
13.5 |
2664*1950*2150 |
Our Advantages
How to design Wood log Pellet Line ?
wood log is the most common raw material for making wood pellets.
So, how to design a suitable wood pellet production line with wood log as raw material?
First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.
After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).
Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.
Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.
Tony Customer Case
The advantages of buying equipments in our company are:
1. a full range of design, construction, equipment supply, construction, installation supervision and commissioning, staff training;
2. license for the design, construction, installation, wiring, and other works;
3. full certification of equipment;
4. officially registered trade mark;
5. full warranty, post warranty and service;
6. warranty on all equipment - 13 months;
7. ratio price-quality-assurance;
8. vast project experience. we have established and put into operation so many of pellet plant productivity on the finished product from 0.5 to 20 t / h in Malaysia, Thailand, Vietnam, Germany, France, Bulgaria, Serbia, Romania, Korea, Australia etc;
9. large stock of finished equipment and spare parts;
10. all equipment of our production, equipped with electric motors and gearboxes, that made in big company
The Best Service Of Tony
1.24 Hours Onlime Service.Inquiry will be replied within2 hours.
2.All-the-way tracking serviceoffered from placimg order to delivery.
3.Free training for operation,debuggig and dailymaintenance
4.We can provideprofessional guide installation
5.One year warranty and allround afer-sales service..Customized design and fowchart are available for ourclients. 6.Independent R&D team andstrict & scientific management system
Tony Honors and Certificates
FAQ
Questions asked FrequentlyQ: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q: What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q: What are pellets used for?
A: Pellets are used mainly for heating, animal feed, and animal bedding. Many other applications may apply.
Q: What size does my material need to be, to run through the pellet mill?
A: All materials must be 5mm or less.
Q: What size pellets can I make?
A: We have dies sizes from 4mm-12mm, depending on the machine or your raw materials.
Q: Do you ship worldwide?
A: Yes. We have sent machines to Canada, Europe, Asia, Southeast Asia, Africa, South America, Ireland and Australia.
Q: If I purchase a pellet mill, will you show me how to make pellets?
A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need.
){kind=link}